EasyManuals Logo
Home>Wacker Neuson>Vibratory rammers & tampers>BS 50-2

Wacker Neuson BS 50-2 User Manual

Wacker Neuson BS 50-2
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #17 background imageLoading...
Page #17 background image
wc_si000408gb.fm
17
BS 50-2 Labels
2.2 Label Meanings
Wacker Neuson machines use international pictorial labels where needed. These
labels are described below.
A
To start the machine:
1. Move the throttle to the IDLE position.
2. Push the purge bulb 10 times.
3. Close the choke.
4. Pull the starter rope until engine starts.
5. Move the throttle to the FAST position.
To stop the machine:
1. Move the throttle past the SLOW position.
Warning! To reduce the risk of hearing loss, always wear
hearing protection when operating this machine.
Read the Operator’s Manual.
Danger!
Asphyxiation hazard.
Engines emit carbon monoxide.
Do not run the machine indoors or in an enclosed area
unless adequate ventilation, through such items as
exhaust fans or hoses, is provided.
No sparks, flames, or burning objects near the
machine.
Stop the engine before refueling.
This label is molded into the cover. If the label becomes
illegible, the cover must be replaced. Refer to the Parts
Book for ordering information.

Other manuals for Wacker Neuson BS 50-2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Wacker Neuson BS 50-2 and is the answer not in the manual?

Wacker Neuson BS 50-2 Specifications

General IconGeneral
BrandWacker Neuson
ModelBS 50-2
CategoryVibratory rammers & tampers
LanguageEnglish

Related product manuals