Wacker Neuson BS 50-2 User Manual

wc_tx003047gb.fm
23
BS 50-2 Operation
4 Operation
4.1 Preparing the Machine for First Use
Preparing for
first use
To prepare your machine for first use:
1. Make sure all loose packaging materials have been removed from the machine.
2. Check the machine and its components for damage. If there is visible damage,
do not operate the machine! Contact your Wacker Neuson dealer immediately
for assistance.
3. Take inventory of all items included with the machine and verify that all loose
components and fasteners are accounted for.
4. Attach component parts not already attached.
5. Add fluids as needed and applicable, including fuel, engine oil, and battery acid.
6. Move the machine to its operating location.

Wacker Neuson BS 50-2 Specifications

General

Brand	Wacker Neuson
Model	BS 50-2
Category	Vibratory rammers & tampers
Language	English