wc_tx003048gb.fm
42
Maintenance BS 50-2
5.12 Long-Term Storage
Introduction
This machine requires preventive maintenance before long-term storage.
Performing preventive maintenance helps to preserve machine components and
ensures that the machine will be ready for future use.
When
Prepare your machine for extended storage if it will not be operated for 30 days or
more.
Preparing for
storage
Follow the procedures below to prepare your machine for storage.
1. Complete any needed repairs.
2. Replenish or change oils (engine, ramming sytem, etc.) per the intervals
specified in the Periodic Maintenance table.
3. 4-cycle machines only: Consult the engine owner’s manual for instructions on
preparing the engine for storage.
Stabilizing the
fuel
After completing the procedures listed above, fill the fuel tank completely and add a
high-quality stabilizer to the fuel.
Choose a stabilizer that includes cleaning agents and additives designed to
coat/protect the cylinder walls.
Make sure the stabilizer you use is compatible with the fuel in your area, fuel
type, grade and temperature range. Do not add extra alcohol to fuels which
already contain it (for example, E10).
Add the correct amount of stabilizer per the manufacturer’s recommendations.
Storing the
machine
Perform these remaining steps to store your machine.
1. Wash the machine and allow it to dry.
2. Move the machine to a clean, dry, secure storage location.
3. Secure the machine in an upright position.
4. Cover the machine.
To Next Page
Loading...
Need help?
General
