Safety Information Rammer Repair
16 wc_si000514gb.fm
1.6 Service and Repair Safety
The service procedures contained in this manual are intended for use
by an individual equipped with the proper tools and equipment and
familiar with safe shop practices.
Should questions arise during the service or repair of this equipment
please contact Wacker Neuson for assistance! Wacker Neuson
Corporation maintains a staff of trained service specialists to answer
your questions and to provide assistance and training.
DO NOT remove bottom spring cover without first reading disassembly
procedures or receiving instruction from someone familiar with its safe
removal! The spring cover is under heavy spring pressure and could
cause a serious injury if the proper disassembly procedures are not
followed.
DO NOT run the engine while it is off the machine without first
removing the clutch! Centrifugal force will cause the clutch shoes to
separate and fly off the engine crankshaft with considerable force.
WARNING
To Next Page
Loading...
Need help?
General
