Initial Setup and Overview G 14
32 wc_tx001185gb.fm
3.6 Generator Monitoring
Description
Generator information is displayed on the four meters on the control panel. The
meters display the operating voltage (h), frequency (j), and amperage (k).
Generator
meters
Volts “V”—Displays the AC output voltage being produced by the generator.
Hertz “Hz”—Displays output frequency.
Amps “A”—Displays the AC output amperage produced by the generator. If the
generator is operating at no load, output amperage will display a “0”.
V Hz
HOUR METER
FUEL
A
A
h
j
k