Transportation
5.1 Articulated Joint Locking Bar
28
Operator’s Manual | RTLx-SC3 | 5100061327 | 09/2022 | [en-US]
5 Transportation
5.1 Articulated Joint Locking Bar
A bar is provided to lock the articulated joint, and prevent the two machine
halves from swinging together.
When lifting or jacking up the machine, secure the articulated joint with the
bar as shown. Hold bar in position using the cotter pin (1) provided.
Fig.2: Articulated joint locking bar
When operating the machine, place the bar in the storage clamp (2) as
shown.
5.2 Lifting the Machine
WARNING
Crushing hazard
You may be crushed if the lifting devices fail.
► Do not stand under, or get onto, the machine while it is being lifted or
moved.
WARNING
Crushing hazard
The machine can drop if it is lifted by the ROPS or any other part of the
frame. These components are not designed to support the weight of the ma-
chine.
► Use only the designated lifting points to lift the machine.
Requirements
• Lifting equipment (crane or hoist) capable of supporting the machine’s
weight
• Lifting hooks and chains capable of supporting the machine’s weight
• Engine stopped
To Next Page
Loading...
Need help?
General
