Storage
Long-term Storage 9.2
81
[en-US] | 09/2022 | 5100061327 | RTLx-SC3 | Operator’s Manual
• If your machine has an engine equipped with a fuel valve, start the en-
gine, close the fuel valve, and run the engine until it stops.
• Consult the engine owner’s manual for instructions on preparing the en-
gine for storage.
Stabilizing the fuel
After completing the procedures listed above, fill the fuel tank completely
and add a high-quality stabilizer to the fuel.
• Choose a stabilizer that includes cleaning agents and additives designed
to coat/protect the cylinder walls.
• Make sure the stabilizer you use is compatible with the fuel in your area,
fuel type, grade, and temperature range. Do not add alcohol to fuels
which already contain it (for example, E10).
• For engines with diesel fuel, use a stabilizer with a biocide to restrict or
prevent bacteria and fungus growth.
• Add the amount of stabilizer per the manufacturer’s recommendations.
Storing the machine
• Wash the machine and allow it to dry.
• Move the machine to a clean, dry, secure storage location. Block or
chock the wheels to prevent machine movement.
• Use touch-up paint as needed to protect exposed metal against rust.
• If the machine has a battery, either remove or disconnect it.
• Cover the machine. Exposed rubber items should be protected from the
weather. Either cover them or use a protectant.
9
To Next Page
Loading...
Need help?
General
