User’s Manual Pulse • PulsePlus
31
Amount -64...+63 Determines the amount of modulation in a value range
of -64 to +63.
The intensity of the modulation Amount depends on the type of modulation source
you select:
• For the so-called unipolar modulation sources Env1, Env2, Modwheel, Aftertouch,
Velocity, Breath Control and Control X, the modulation amount lies within the
range of 0...1.
• For the so-called bipolar modulation sources LFOs, Keytrack and Pitch Follow, the
modulation amount lies within the range of -1...0...+1. Please note that the linked
modulation sources LFO1*Modwheel, LFO1*Aftertouch and LFO2*Env1 are also
bipolar modulation sources.
• For the modulation sources Keytrack and Pitch Follow, a value of +45 represents
100% of the scale.
The following table illustrates the relationship between the modulation
amount and significant musical intervals. For bipolar sources, the
interval is doubled.
Table 2: Modulation amount scale
For intervals greater than a fifth (tonic to mediant), the Amount is
proportional.
Destination 0...15 Destinations are assigned in the same manner as
sources. The available destinations are also printed on
the front panel 햵.
Table 3: Modulation destinations
Here are some examples of modulation assignments:
0 Pitch
1 Osc 1 Pitch
2 Osc 2 Pitch
3 Osc 3 Pitch
4 Pulsewidth 1
5 Pulsewidth 2
6 Osc 1 Level
7 Osc 2 Level
8 Osc 3 Level
9 Noise Level
10 Cutoff
11 Resonance
12 Volume
13 Panning
14 LFO 1 Speed
15 Mod 1 Amount
Interval in Interval Mod Amount
semitones
1 small Second 6
2 large Second 8
3 small Mediant 10
4 large Mediant 12
5 small Subdominant 13
6 large Subdominant 14
7 Dominant 15
... ... ...
To Next Page
Loading...
Need help?
General
