12
OWNER'S MANUAL
To Change The Split (Left Hand) Voice Note
Press and hold the Split button while
depressing the desired Voice Select button.
Change The Main (Right Hand) Voice
1. Exit Split Mode by pressing the Split button.
2. Select the new voice and then press Split
again to re-enter Split mode.
To Change the Split Point
Hold the Split button and then press a key on
the keyboard to determine the split point.
You can also change the split point with the
Function Mode.
1. Press the Function button.
2. Turn the Value Dial to select split point edit
menu, the display will show “S .P:xx”.
3. Press the Function button again to enter the
parameter edit menu. The numeric parameter
will blink to indicate the number is editable.
4. Turn the Value Dial to select the split point
(A-1 to C-7).
To Change the Split (left hand)Octave
1. Press and hold the [Octave] button, 2 seconds
later the LCD will display “Split Oct”.
2. When the display is on the split octave
screen, turn the Value Dial to change Split
Octave (-1 or +1).
To Turn O Split Mode
Press the Split button. The LED will turn o as
well as the currently selected voice.
TUNING
To Change The Voice Tuning
1. Press the Function button.
2. Turn the Value Dial to select the Tune edit
menu, the display will show “Tune a1”.
3. Press the Function button again to enter the
parameter edit menu. The numeric parameter
will blink to indicate the number is editable.
4. Turn the Value Dial to select the Tuning (the
range is 415Hz to +466Hz).
EFFECTS
The Reverb and Chorus eects may be applied
to each voice individually and will be retained
even when the power is turned o.
To apply either eect, press either button. The
button will light and the eect will be heard
when the piano is played.
To turn o the eect press the button of the
desired eect again and the LED light will go o.
Reverb and Chorus settings are set per
Instrument and retained over power cycling.
S.P:E2
SplitOct
Tune a1
To Next Page
Loading...
Need help?
General
