Williams ALLEGRO 2 User Manual

16
OWNER'S MANUAL
EQ Treble Level Setting
1. Press the Function button.
2. Turn the Value Dial to select the EQ Bass edit
menu, the display will show “EQ Treb”.
3. Press the Function button again to enter the
parameter edit menu. The numeric parameter
will blink to indicate the number is editable.
4. Turn the Value Dial to select the EQ Treble
Level (-12 to +12).
ADVANCED
FUNCTIONS
Power Auto Shutting Down On/O Setting
The Allegro 2 has a Power saving function that
will shut o the Piano after 30 minutes of non-
use. The default setting is O, however if you
nd you want this function to work use the
steps below.
1. Press the Function button.
2. Turn the Value Dial to select the Power Auto
edit menu, the display will show “AutoPowr”.
3. Press the Function button again to enter the
parameter edit menu. The numeric parameter
will blink to indicate the number is editable.
4. Turn the Value Dial to select the Power Auto
feature on or o.
Factory Reset
Performing a Factory Reset will clear all battery
backed memory and restore all functions to
factory defaults.
1. Turn the Power O.
2. Press and hold the transpose and octave
buttons.
3. Turn the Power on. If the display shows
“Reset Ok”, the action is successful.
Touch Sensitivity
You can change the way the keyboard reacts
to your playing by adjusting the Velocity curve
settings
1. Press the Function button.
2. Turn the Value Dial to select the Velocity
Curve edit menu, the display will show
“VelCurve”.
3. Press the Function button again to enter the
parameter edit menu. The numeric parameter
will blink to indicate the number is editable.
4. Turn the Value Dial to select Velocity Curve
(0-4).
Velocity Curve List
1. Fixed Velocity
2. soft
3. normal
4. hard
EQ Treb
AutoPowr

Williams ALLEGRO 2 Specifications

General

Brand	Williams
Model	ALLEGRO 2
Category	Musical Instrument
Language	English