Winix ZERO User Manual

English
ZERO 4
CONTROLS
Air
Outlet
Vent
PlasmaWave Indicator
Indicates whether
PlasmaWave is enabled or
disabled.
Mode Button
Timer Indicator
If timer has been set, the
LED light indicates the set
time of operation.
Reset Button
After replacing a filter,
press the RESET button
for at least 5 seconds.
Press to cycle through
and set the desired
mode of operation
(Auto, Sleep).
Fan Speed
Indicator
Indicates the
current fan speed.
Air Quality
Indicator
Color-coded LED
indicates one of
three levels of air
PlasmaWave Button
Enables or disables
PlasmaWave .
Power Button
Turns the unit on
or off.
Timer Button
Press to cycle
through and set
desired length of
operation (1hr,
4hr, 8hr,[NO
TIMER])
Light Sensor
Detects the
amount of
ambient light
within the
environment,
to adjust the
brightness
of the LED
indicators.
quality.
Fan Speed Button
Enables Manual operation of the
unit. Press to cycle through and
set the desired fan speed (Low,
Medium, High, Turbo).
Change Filter Indicator
LED light indicates when it is time to
change the filter.

Winix ZERO Specifications

General

Filtering capability	Cigarette smoke, Fine dust, Pollen
Number of filter stages	4
Filter cleaning indicator	Yes
Product color	Black, White
Built-in display	No
Noise level	51 dB
Certification	CE, RoHS, WEEE
Air purify rate	- m³/h
Suitable for room area up to	35 m²
Power consumption (max)	70 W
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Depth	208 mm
Width	380 mm
Height	600 mm
Weight	7000 g