Winix ZERO User Manual

INITIAL OPERATION
English
ZERO 9
• In Auto mode, as the indoor air quality improves, the fan
speed will automatically be reduced to Low.
•
When the unit is running, you may hear a chirping or buzzing
sound. The sound is from large particles passing through
PlasmaWave
®
, it is normal and does not signify product
failure. To disable PlasmaWave
®
, see page 12.
Note
①
Insert the power cord into an electrical
outlet.
②
Press the ‘Power’ button.
③
By default, when the unit first powers on, the
mode will be set to Auto with PlasmaWave
®
enabled.
• When in Auto mode, the fan speed will
be automatically adjusted according to
the environments air quality.
• PlasmaWave
®
works to remove harmful
airborne contaminants.
• During the first 30 seconds of power up, the Air Quality
Indicator will cycle through Blue, Yellow and Red colors.
The Particle Sensors take approximately 30 seconds to
gauge the air quality in the environment, after which
normal
operation will begin.
Note

Winix ZERO Specifications

General

Filtering capability	Cigarette smoke, Fine dust, Pollen
Number of filter stages	4
Filter cleaning indicator	Yes
Product color	Black, White
Built-in display	No
Noise level	51 dB
Certification	CE, RoHS, WEEE
Air purify rate	- m³/h
Suitable for room area up to	35 m²
Power consumption (max)	70 W
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Depth	208 mm
Width	380 mm
Height	600 mm
Weight	7000 g