46
The permissible values per workstation can also vary from
country to country. This information should nevertheless
enable the user to make a better estimation of dangers
and risks.
Sound level in dB
Operation L
WA
= 112,4 dB(A)
Sound level at the workplace in dB
Operation L
pAeq
= 102.5 dB(A)
A measurement uncertainty allowance K = 4 dB applies
to the mentioned emission values.
Information on dust emission
The dust emission values measured in accordance with
the „principles for testing dust emission“ of the commit-
tee of experts of wood are below 2 mg/m3. This means
that the TRK limit for wood dust which is valid in the Fed-
eral Republic of Germany will be permanently kept to if
the machine is connected to a properly working dust ex-
tractor with at least 20 m/s air speed.
Use hearing or ear protection.
Use protective mask and
goggles.
Use eye protection.
In these operating instructions we have marked the places
that have to do with your safety with this sign: m
m Safety notes
• Pleasepassonsafetynotesandinstructionstoallthose
who work on the machine.
• Themachinemustonlybeusedintechnicallyperfect
condition in accordance with its designated use and the
instructions set out in the operating manual, and only
by safety-conscious persons who are fully aware of the
risks involved in operating the machine. Any functional
disorders, especially those affecting the safety of the
machine, should therefore be rectified immediately.
• OnlytoolswhichcorrespondtotheEuropeannorm,EN
847-1, may be used.
• Observe allsafetyinstructionsandwarnings attached
to the machine.
• Seetoitthatsafetyinstructionsandwarningsattached
to the machine are always complete and perfectly leg-
ible.
• Cautionwhenworking:Thereisadangertongersand
hands from the rotating cutting tool.
• Make sure that the machine stands stable on rm
ground.
• Check all power supply lines. Do not use defective