RapidMatch
TM
GO Spectrophotometer
2
Table of Contents
1. Packaging 5
2. Overview 5
3. Powering On 6
4. Charging the Battery 6
5. Measure Button 7
6. Contact Sensors, Indicators and LEDs 8
7. Home Screen 8
8. Navigating the Screen 9
9. WiFi Mode 10
10. Settings Mode 10
11. Calibration 13
12. Measurement 14
13. Cleaning 17
14. Specifications 17
15. Troubleshooting 18
16. Service Information 20
17. Replacement Parts 20
Compliance Information
To view E label Compliance information for WiFi devices, choose Settings > Device
Information > Device Label
CE Declaration
Hereby, X-Rite, Incorporated, declares that this model is in compliance with the
essential requirements and other relevant provisions of Directive(s) EMC Directive
2014/30/EU, LVD 2014/35/EU and RoHS 2011/65/EU.
Models with WiFi:
CE Mark: Radio Equipment Directive (2014/53/EU) CE 1177
Zentri Module No. AMW106
CE Mark: Radio Equipment Directive (2014/53/EU) CE 1177
EN 300 328 V2.1.1
EMC : EN 301 489-1 V2.1.1, EN 301 489-17 V.3.1.1,
EN 55022:2010/AC:2011, EN 55024:2010
Health : EN 62311: 2008
Safety : EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013
Federal Communications Commission Notice
NOTE: This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are
To Next Page
Loading...
Need help?
General
