x-sense XS01-W User Manual

Low Battery
Red LED flashes
once every 60
seconds.
1 beep every
60 seconds
The alarm
gives
Independent
Warning.
Malfunction
Red LED flashes
twice every 40
seconds.
2 beeps every
40 seconds
The alarm
gives
Independent
Warning.
Silence Mode
If you press the silence button during an alarm state, the unit will be in the silence mode for 9 minutes.
During the silence mode, the red LED will flash once every 5 seconds. The alarm will enter the normal
mode after 9 minuets.
NOTES
1. Mute all other interconnected alarms by pressing the silence button on the initiating smoke
alarm. But the initiating smoke alarm can
’t be silenced by pressing the silence button of any
other interconnected alarm.
2. Under interconnected condition, the initiating smoke alarm can’t be triggered again during
the 9-minute silence duration. But other interconnected alarms can be triggered when
detecting dangerous smoke levels during the silence mode.
Technical Specifications
Power Supply
10-year sealed lithium battery
Sensor Type
Photoelectric
Safety Standards
EN 14604:2005+AC:2008
Standby Current
< 15 uA
Alarm Current
< 150 mA
Coverage Area
20-40 m
2
Best Operating Ambient
Temperature
4.4-37.8 ℃
Operating Relative
Humidity
≤ 85% (non-condensing)
Alarm Loudness
≥ 85 dB at 3 m @ 3.2 ± 0.3 kHz pulsing alarm
Silence Duration
About 9 minutes
Operating Frequency
868 MHz
Maximum Number of
Interconnected Units
24 wireless units (Only compatible with X-SENSE wireless
smoke alarms)

x-sense XS01-W Specifications

General

Brand	x-sense
Model	XS01-W
Category	Smoke Alarm
Language	English