xi
Important Safety Information
General Precautions
1. Before installing and using the inverter, read all appropriate sections
of this guide as well as all instructions and cautionary markings on
the inverter and the batteries.
2. Do not operate the inverter if it has received a sharp blow, been
dropped, or otherwise damaged. If the unit is damaged, see “Product
and System Information” on page D–1 and “Return Material
Authorization Policy” on page D–3.
3. Do not dismantle the inverter; it contains no user-serviceable
components. Attempting to service the unit yourself could cause
electrical shock or fire. Internal capacitors remain charged after
all power is disconnected.
4. To reduce the risk of electrical shock, disconnect AC and DC power
from the inverter before working on any circuits connected to the
inverter. Turning off controls will not reduce this risk.
5. Do not expose the inverter to rain, snow, spray, or bilge water.
6. To reduce the risk of overheating or fire, do not obstruct the
ventilation openings, and do not install the inverter in a zero-
clearance compartment.
Explosive Gas Precautions
1. Batteries generate explosive gases during normal operation. Be sure
to read this guide and follow the instructions exactly before
installing or using your inverter.
2. This equipment contains components which tend to produce arcs or
sparks. To prevent fire or explosion, do not install the inverter in
compartments containing batteries or flammable materials or in
WARNING
Before installing and using your PROwatt
™
3000 Inverter, be
sure to read and save these safety instructions.
To Next Page
Loading...
Need help?
General