You can sign an email payload through the Smart Card with your private key. This action enables other
users to validate the signature with your public key, which they can obtain from you or from LDAP. This
validation assures the recipient that the content is original and was not compromised in transit.
You can also encrypt an email payload with your public key through the Smart Card or LDAP, then send
it to the user. This option offers the benefit that, while in transit through the infrastructure, no one can
decipher the contents of the mail note. After it is in your inbox, you can decrypt the email with your
private key, making the payload readable again.
Supported Card Readers
The customer is responsible for providing a card reader for each Xerox
®
device. The following card readers
are compatible with the solution:
• Gemplus GemPC USB SL
• Gemplus GEMPC Twin
• SCM Micro SCR3310 v1
• SCM Micro SCR3311 v1
• HID Omnikey 3021
• HID Omnikey 3121
• Identive - SCR3310v2.0 USB Smart Card Reader
Other Chip Card Interface Device (CCID) compliant readers can function with the solution, but they are
not validated.
Supported Card Types
The customer is also responsible for purchasing and configuring the access cards. The following card
types are supported:
• Smart Card
• PIV and PIV II
• Gemalto.NET
Other card types function with the solution, but they are not validated.
1-3Xerox
®
AltaLink
®
Series
Smart Card Installation and Configuration Guide
Introduction
To Next Page
Loading...
Need help?
General
