MMEENNUU IITTEEMM DDEESSCCRRIIPPTTIIOONN
PPaacckkeett SSiizzee ((kkbbyytteess))
0–64000 (0*)
Set the packet size for data transmission.
Note: For more information, refer to the Embedded Web Server Administrator Guide.
USB
MMEENNUU IITTEEMM DDEESSCCRRIIPPTTIIOONN
PPCCLL SSmmaarrttSSwwiittcchh
• Off
• On*
Set the printer to switch to PCL emulation when a print
job received through a USB port requires it, regardless
of the default printer language.
Note: When this setting is disabled, the printer
does not examine incoming data and uses the
default printer language specified in the Setup
menu.
PPSS SSmmaarrttSSwwiittcchh
• Off
• On*
Set the printer to switch to PS emulation when a print
job received through a USB port requires it, regardless
of the default printer language.
Note: When this setting is disabled, the printer
does not examine incoming data and uses the
default printer language specified in the Setup
menu.
JJoobb BBuuffffeerriinngg
• Off*
• On
Temporarily store print jobs in the hard disk before
printing.
Note: This menu item appears only when a
hard disk is installed.
MMaacc BBiinnaarryy PPSS
• Auto*
• On
• Off
Set the printer to process Macintosh binary PostScript
print jobs.
Note:
• Auto processes print jobs from computers
using either Windows or Macintosh
operating.
• Off filters PostScript print jobs using the
standard protocol.
EEnnaabbllee UUSSBB PPoorrtt
• Disable
• Enable*
Enable the standard USB port.
Note: An asterisk (*) next to a value indicates the factory default setting.
132
Xerox
®
B410 Printer User Guide
Use Printer Menus