Xerox B410 User Manual

Basic Regulations
Xerox has tested this printer to electromagnetic emission and immunity standards. These standards are designed to
mitigate interference caused or received by this printer in a typical office environment.
Changes or modifications to this device not specifically approved by Xerox
®
Corporation can void the authority of
the user to operate this equipment.
UNITED STATES FCC REGULATIONS
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the Federal Communications Commission (FCC) Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy. If the equipment is not installed and used in accordance
with the instruction manual, it may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference. Users are required to correct the interference
at their own expense.
Changes or modifications to this equipment not approved by Xerox can void the authority of the user to operate
this equipment.
To maintain compliance with FCC regulations, shielded cables must be used with this equipment. Operation with
non-approved equipment or unshielded cables is likely to result in interference to radio and TV reception.
WWaarrnniinngg:: To ensure compliance with Part 15 of the FCC rules, use shielded interface cables.
Xerox
®
B410 Printers
Xerox
®
B410 Printers comply with Part 15 of the FCC rules. Operation is subject to the following two conditions:
• The devices are not used to cause harmful interference.
• The devices must accept any interference received, including any interference that can cause an undesired
operation.
Responsible Party: Xerox Corporation
Address: 800 Phillips Road, Webster, NY 14580
Internet contact information: www.xerox.com/en-us/about/ehs.
REGULATORY INFORMATION FOR 2.4-GHZ AND 5-GHZ WIRELESS NETWORK ADAPTERS
This product contains a 2.4-GHz and 5-GHz Wireless LAN radio transmitter module that complies with the
requirements specified in FCC Part 15, Industry Canada RSS-210, and European Council Directive 2014/53/EU.
Radio Frequency (RF) output power of this device will not exceed 20 dBm in either frequency band.
Operation of this device is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.
240
Xerox
®
B410 Printer User Guide
Regulatory Information

Xerox B410 Specifications

General

Color	Yes
Print technology	Laser
Maximum resolution	1200 x 2400 DPI
Duplex printing mode	Auto
Print resolution black	1200 x 1200 DPI
Warm-up time (from sleep mode)	6.9 s
Time to first page (black, normal)	5.4 s
Print margins (top, bottom, right, left)	4.2 mm
Print speed (black, normal quality, A4/US Letter)	47 ppm
Duplex print speed (black, normal quality, A4/US Letter)	24 ppm
PCL fonts	94
Printer fonts	Bitmap, PCL, PostScript
Printing colors	Black
Country of origin	China
Maximum duty cycle	175000 pages per month
Recommended duty cycle	0 - 20000 pages per month
Number of print cartridges	1
Page description languages	PCL 5, PCL 6, PDF 1.7, PostScript 3
Total input capacity	650 sheets
Total output capacity	250 sheets
Paper tray 1 input capacity	550 sheets
Multi-Purpose tray input capacity	100 sheets
Custom media width	105 - 216 mm
Maximum print size	216 x 356 mm
Custom media length	148 - 360 mm
Paper tray media types	Bond paper, Card stock, Envelopes, Glossy paper, Heavy paper, Labels, Letterhead, Lightweight paper, Plain paper, Pre-Printed, Recycled paper, Rough paper
Paper tray media weight	60 - 120 g/m²
ISO A-series sizes (A0...A9)	A4, A5
Multi-purpose tray media types	Bond paper, Envelopes, Glossy paper, Heavyweight paper, Labels, Letterhead, Plain paper, Preprinted forms, Recycled paper
Maximum ISO A-series paper size	A4
Multi-Purpose Tray media weight	60 - 216 g/m²
Display	LCD
Control type	Touch
Product color	Grey, White
Display diagonal	4.3 \
Market positioning	Home & office
AC input voltage	220 - 240 V
AC input frequency	47-63 Hz
Power consumption (off)	0.1 W
Power consumption (standby)	7.7 W
Power consumption (printing)	669 W
Mac operating systems supported	Mac OS X 10.11 El Capitan, Mac OS X 10.12 Sierra, Mac OS X 10.13 High Sierra
Server operating systems supported	Windows Server 2012, Windows Server 2012 R2, Windows Server 2016, Windows Server 2019, Windows Server 2022
Windows operating systems supported	Windows 10, Windows 11
Storage temperature (T-T)	-40 - 40 °C
Operating temperature (T-T)	15 - 32 °C
Operating relative humidity (H-H)	8 - 80 %
Cables included	AC
USB connector	USB Type-A / USB Type-B
Optional connectivity	Wireless LAN
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Wi-Fi	No
Cabling technology	10/100/1000Base-T(X)
Security algorithms	FIPS 140-2, TLS
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Mobile printing technologies	Apple AirPrint, Mopria Print Service
Storage media	eMMC
Internal memory	1024 MB
Internal storage capacity	8 GB
Sound power level (printing)	71 dB
Sound pressure level (printing)	56 dB
Sound pressure level (quiet mode)	52 dB
Sound pressure level (duplex printing)	55 dB
Package depth	470 mm
Package width	430 mm
Package height	420 mm
Package weight	18000 g

Weight and Dimensions

Depth	373 mm
Width	399 mm
Height	308 mm
Weight	15200 g