Job Completion Notification
You can choose to be notified when your job is done printing. A message appears in the
lower right corner of your computer screen with the name of the job and the name of
the printer where it was printed.
Note
This feature is only available when your printer is connected to your computer over a
network. It is not supported in all operating systems.
Secure Print Jobs
The Secure Print job type allows you to print a job after you select your user identification
and enter your passcode at the printer Control Panel.
Sample Sets
The Sample Set job type allows you to send a multiple-copy job, print a sample copy of
the job, and hold the remaining copies of the job at the printer. After you review the
sample copy, you can release or delete the remaining copies.
Delayed Printing
A print job can be delayed for up to 24 hours from the original job submission time.
Enter the time at which you would like the job to print. Use either a 12-hour format or
a 24-hour format.
Saving Print Jobs to the Printer
The Store File in Folder job type stores a print job in a folder in the printer. You can print
the job from the printer Control Panel. The job is not automatically deleted after printing,
but it can be manually deleted at the printer Control Panel.
Folding
If your machine is equipped with a finisher, you can make prints using the folding option.
The option folds your prints in half (single or bifolding) or in thirds (C-fold or Z-fold types).
The folding option is selected from the print driver.
These fold types are available:
• Single Fold (Bi-Fold)
• C-Fold
• Z-Fold
• Z-Fold Half Sheet
5-9Xerox
®
Color C60/C70 Printer
User Guide
Printing
To Next Page
Need help?
General