Xerox DocuMate 252 User Manual

DocuMate 252 Scanner User’s Guide 117
Maintenance
To Install Another Driver
Before you can install another driver for your scanner, you must
remove the currently installed driver first. Then the new driver can
be installed.
1. Uninstall the One Touch 4.0 driver.
a. Open the Windows Control Panel.
b. Double-click on Add/Remove Programs.
c. Select One Touch 4.0 then click on the Remove button.
d. An “Add or Remove” message box opens and asks if you
are sure you want to remove One Touch 4.0 from your
computer. Click Yes.
The One Touch 4.0 software is removed from your computer.
2. Unplug the scanner USB cable.
3. Reboot (restart) your computer.
4. Follow the instructions in “Step 2: Install the Software” on
page 7 of this User Guide and follow steps for installing one of
the other driver options.
NOTE: The One Touch 4.0 driver is required for the scanner’s
buttons to function. If you select a driver without One Touch 4.0,
the scanner buttons will not initiate scanning.

Xerox DocuMate 252 Specifications

General

Film scanning	No
Color scanning	Yes
Input color depth	48 bit
Maximum scan size	215 x 355 mm
Optical scanning resolution	600 x 1200 DPI
Scanner type	Sheet-fed scanner
Sensor type	CCD
Dimensions (WxDxH)	330 x 310 x 150 mm
Minimum system requirements	- Pentium II - Windows 2000/ME/XP - 128MB of RAM - 200MB hard disk space - CD-ROM - USB
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Weight	3900 g