Xerox DocuMate 4799 Manual

Loading Documents to Scan Xerox
®
DocuMate
®
4799
User Guide 5-5
Loading Documents
1. Adjust the paper guides to the width of the document you want to scan. Extend the input tray
and output tray to the length of the doucment.
Flip up the paper stop to make sure the paper stays in the output area as they are exited from
the scanner.
2. Load the documents face up with their tops into the Automatic Document Feeder.
The stack of pages should not exceed the maximum height indicated on the input tray.
3. You can now scan the documents using the scanner button, OneTouch, or one of the other
scanning interfaces.
Scanning Interfaces
• OneTouch Control Panel—When you press the Start/Stop button on the scanner, the
documents are scanned using the scans settings for the first OneTouch scan function. The
scanned image is then sent to a destination on your computer or network drive.

Xerox DocuMate 4799 Specifications

General

Film scanning	No
Color scanning	Yes
Duplex scanning	-
Input color depth	24 bit
Maximum scan size	297 x 432 mm
ADF scan speed (b/w, A4)	100 ppm
Enhanced scan resolution	300 x 300 DPI
Optical scanning resolution	600 x 600 DPI
Scanner type	Flatbed & ADF scanner
Product color	Blue, White
Sensor type	CCD
Daily duty cycle (max)	40000 pages
Auto document feeder (ADF) input capacity	250 sheets
Minimum scan area (ADF)	48 x 70 mm
ISO A-series sizes (A0...A9)	A3, A4
Maximum ISO A-series paper size	A3
Auto Document Feeder (ADF) media weight	75 - 80 g/m²
USB version	2.0
Standard interfaces	USB 2.0
Minimum RAM	2048 MB
Minimum processor	Intel® Pentium® 4
Minimum storage drive space	350 MB
Minimum system requirements	CD/DVD-ROM
Compatible operating systems	Windows 7 Windows Vista Windows XP
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Depth	585 mm
Width	474 mm
Height	329 mm
Weight	25000 g