DocuMate 515 Scanner User’s Guide 33
Scanning
The Device Settings Tab
A Device Settings tab appears on the Scan Configurations dialog box
when your selected Destination Application sends the scanned image to a
printer, fax application, or other device. You use the options on the Device
Settings tab to select settings for the device.
1. Click on the Device Settings tab.
Fit to page, reduce image if necessary—If the image is too big to fit
on a single page, the image will automatically be reduced to fit the
page.
Actual size, crop image if necessary—If the image is too big to fit
on a single page, the image will automatically be cropped around its
edges to fit on the page.
Center image on page—The image will be printed in the center of
the page instead of at the top right corner.
Maintain aspect ratio—The aspect ratio is the length-to-width
relationship of the image’s dimensions. Select this option so the
image’s relative proportions remain constant.
AutoRotate image for best fit—If the image is a Landscape format
and the device is printing in the Portrait mode, or vice versa, rotate
the image to fit on the page.
Collate copies—If you’re printing more than one page, collate the
copies. Enter the number of copies in the Copies box.
Advanced—Click to see additional settings for the device. The dialog
box that opens is specific to the device. For example, if the device is
your printer, the dialog box is your printer’s setup settings.
2. Click OK or Apply.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
