Before using the machine
1 - 8
1
Do not play this CD-ROM using an incompatible CD-ROM player. Playing at high volume levels can
cause hearing damage and speaker failure.
This equipment is certified as a Class 1 laser product under [IEC60825]. This means that the machine
does not emit hazardous laser radiation. Since radiation emitted inside the machine is completely
confined within the protective housings and external covers, the laser beam cannot escape from the
machine during any phase of user operation. Do not perform any operation apart from the instructions given
in the manual. There may be a danger of laser beam leakage.
Never touch a labelled area found on or near the fuser unit. You can get burnt. If a sheet of paper is
wrapped around the heat roller, do not try to remove it by yourself to avoid injuries or burns. Switch
off the machine immediately, and contact our Customer Support Centre.
After you have just used the printer, some parts inside the printer are extremely hot. When you open
the front cover or back cover of the printer, never touch the shaded parts shown in the illustrations.
Wait for the printer to cool down before you touch the internal parts of the printer.
Do not use conductive paper, e.g. folding paper, carbonic paper and coated paper. When paper jam
occurs, they can cause a short circuit and fire.
The fuser unit is marked a caution label. Please do not remove or damage the label.
Inside the printer
(Front View)
Open the back cover
(Back View)
To Next Page
Loading...
Need help?
General