Moving the Printer
• Always power off the printer, then wait for the printer to shut down. To power off the printer,
verify that there are no jobs in the queue, press the Power/Wake button, then touch Power Off.
After 10 seconds, the touch screen goes dark and the printer powers down. Open the printer front
door, then power off the main power switch. For details, refer to Restarting, Placing in Sleep Mode,
or Powering Off the Printer.
• Unplug the power cord from the electrical outlet, then disconnect the power cord from the back of
the printer.
• To avoid spilling toner, keep the printer level.
Note: When you move the printer over a long distance, to prevent toner from spilling, remove
the drum cartridges and toner cartridges. Pack the printer inside a box.
Caution: Failure to repackage the printer properly for shipment can result in damage not
covered by the Xerox
®
Warranty or Service Agreement. The Xerox
®
Warranty and Service
Agreement do not cover damage to the printer caused by improper moving.
Xerox
®
EC8036/EC8056 Color Multifunction Printer
User Guide
247
Maintenance
To Next Page
Loading...
Need help?
General
