Xerox Mobile Scanner User Manual

Xerox Mobile Scanner
User’s Guide
17
Insert the Battery
The battery comes pre-installed in the scanner’s battery compartment. Open the battery compartment, on the
underside of the scanner, and pull out the Mylar strip. Close the battery compartment and proceed with charging
the scanner.
If the battery is not pre-installed in your unit, or if you need to replace the battery for any reason, please follow these
instructions for installing the battery.
Warning: Only use the battery model provided with the scanner (NP120 for 3.7V 1700mAh).
1. Open the battery cover on the underside of the scanner.
2. Insert the battery into the compartment. Make sure the battery is inserted in the correct position.
3. Lower the compartment lid and slide the lid in place to lock it.

Xerox Mobile Scanner Specifications

General

Brand	Xerox
Model	Mobile Scanner
Category	Scanner
Language	English