Paper Guide 1-1
1
Selecting stock
There are many factors you must consider when selecting stocks for the Xerox Nuvera EA and
MX Systems. This chapter will help you choose stocks that will optimize image quality and paper
handling.
Stock size and weight ranges
The following table indicates the minimum and maximum paper sizes in inches and millimeters.
The 4-Tray feed module trays hold varying sizes of papers. Trays 1 and 2 can hold papers from
5.5 x 8.27 inches (140x210 mm) to 9.0 x 12.6 inches (228 x 320 mm). Trays 3 and 4 can hold
7.2 x 8.0 inches (183 x 203 mm) to 12.6 x 18.5 inches (320 x 470 mm).
The 2-Tray feed module tray can hold papers from 7.2 x 8.0 inches (183 x 203 mm) to 12.6 x
18.5 inches (320 x 470 mm).
Note
The Nuvera 200/288 2-Tray SFM is capable of feeding paper up to 19.33 inches (491 mm)
in process length.
The following table indicates the minimum and maximum paper weights in pounds and grams
per meter squared. The Xerox Nuvera expresses all paper weights in grams per meter squared
(gsm).
Refer to Appendix A, Converting paper weight from pounds to gsm, for paper weight conversion
information.
Measurement Minimum Maximum
Size in inches 5.5 x 8.27 12.6 x 18.5
Size in millimeters 140 x 210 320 x 470
Measurement Minimum Maximum
Weight in pounds 16 pound bond
40 pound uncoated offset
100 pound coated offset
80 pound cover
110 pound index
Weight in grams
per meter squared
56 gsm bond
56 gsm uncoated offset
140 gsm C2S coated
160 gsm C1S coated
220 gsm
To Next Page
Loading...
Need help?
General