Xerox Phaser 3040 User Manual

Safety
10 Phaser 3010/3040 Printer
User Guide
Operational Safety
Your printer and supplies were designed and tested to meet strict safety requirements. These include
safety agency examination, approval, and compliance with established environmental standards.
Your attention to the following safety guidelines helps to ensure the continued, safe operation of
your printer.
Operational Guidelines
Do not remove the paper source tray that you selected in either the print driver or control panel while
the printer is printing.
Do not open the doors when the printer is printing.
Do not move the printer when it is printing.
Keep hands, hair, neckties, and so on away from the exit and feed rollers.
Covers, which require tools for removal, protect the hazard areas within the printer. Do not remove
the protective covers.
Ozone Release
This printer produces ozone during normal operation. The amount of ozone produced is dependent on
print volume. Ozone is heavier than air and is not produced in amounts large enough to harm anyone.
Install the printer in a well-ventilated room.
For more information in North America, go to:
Phaser 3010 Printer: www.xerox.com/environment
Phaser 3040 Printer: www.xerox.com/environment
In other markets, contact your local Xerox representative or go to:
Phaser 3010 Printer: www.xerox.com/environment_europe
Phaser 3040 Printer: www.xerox.com/environment_europe
Printer Location
Place the printer on a level, solid, non-vibrating surface with adequate strength to hold its weight.
The base printer weight without any packaging materials is approximately 4.6 kg (10.1 lb.).
Do not block or cover the slots or openings on the printer. These openings are provided for
ventilation and to prevent overheating of the printer.
Place the printer in an area where there is adequate space for operation and servicing.
Place the printer in a dust-free area.
Do not store or operate the printer in an extremely hot, cold, or humid environment.
Do not place the printer near a heat source.

Xerox Phaser 3040 Specifications

General

Network ready	No
Duplex printing	Yes
Print technology	LED
Maximum resolution	1200 x 2400 DPI
Time to first page (black, normal)	8 s
Print speed (black, normal quality, A4/US Letter)	24 ppm
Printing colors	Black
Maximum duty cycle	30000 pages per month
Number of print cartridges	1
Total input capacity	150 sheets
Total output capacity	100 sheets
Maximum print size	216 x 297 mm
Paper tray media types	Envelopes, Labels, Plain paper, Recycled paper
ISO A-series sizes (A0...A9)	A4
Standard interfaces	USB 2.0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Mac operating systems supported	Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion
Server operating systems supported	Windows Server 2003, Windows Server 2008
Windows operating systems supported	Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Starter x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows Vista Business, Windows Vista Business x64, Windows Vista Home Basic, Windows Vista Home Basic x64, Windows Vista Home Premium, Windows Vista Home Premium x64, Windows Vista Ultimate, Windows Vista Ultimate x64, Windows XP Home, Windows XP Home x64, Windows XP Professional, Windows XP Professional x64
Power consumption (standby)	57.6 W
Power consumption (printing)	329 W
Certification	CB Certified (IEC 60950-1, Second Edition), CE Mark applicable to Directives 2006/95/EC, 2004/108/EC and 99/5/EC, FCC Part 15, Class B, TUV Listed (UL-60950-1/CSA 60950-1)
Product color	Blue, White
Market positioning	Home & office
Operating temperature (T-T)	50 - 90 °F
Operating relative humidity (H-H)	10 - 85 %
Power supply type	AC

Weight and Dimensions

Dimensions (WxDxH)	- mm