Print
Xerox Phaser 4622
User Guide
35
Some features are only supported by specific printer configurations, operating systems or driver types.
You may see more features or options listed than your specific machine supports.
Add Covers
Use this option to add blank or printed covers to your printed document.
1. To add a cover select the Add Covers button above the table.
2. Select the Cover Options required:
• Front Only provides a front cover.
• Back Only provides a back cover.
• Front and Back: Same provides a front and back cover
with the same settings, on the same media.
• Front and Back: Different provides a front and back cover with individual programing
requirements and on different media if required.
3. Select the Paper Settings for the selected cover options.
4. Select the printing options:
• Blank or Preprinted inserts a blank or pre-printed sheet and does not print an image.
• Printed uses the first page of the document to print the front cover (if selected), and the last
page to print the back cover (if selected).
5. Select OK to save your selections and exit.
The cover details display in the table.
Add Inserts
Use this option to add blank or pre-printed inserts to your printed document. To program the inserts,
you enter the page number of the page before the insert. If an insert is required as your first page,
Before Page 1 can be specified. It is recommended that you work through your document and identify
the page numbers where inserts are required prior to programing.
To add an insert select the Add Inserts button above the table.
1. Using the Inserts Options drop-down menu, select whether the
insert is to be placed Before Page 1 or select After Page(s) to
place inserts after the specified page numbers.
Note To add an insert to the front of your document, use the
Before Page 1 option.
2. Select the number of insert sheets required.
3. Specify the page number before each insert. If multiple inserts
are required it is recommended you enter all the page numbers,
separated by a comma or enter a page range separated by a
dash.
4. Select the Paper requirements for the inserts and select OK.
All the inserts programed display in the table.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
