Print
Xerox Phaser 4622
User Guide
36
5. If any inserts have individual programing, such as a different paper color or a different number of
inserts, select the entry required and use the Edit button to change the programing.
Add Exceptions
Use this option to specify the characteristics of any pages in the print job that differ from the settings
used for the majority of the job. For example, your print job may contain 30 pages that print on
standard size paper and two pages that print on a different size of paper. Use this option to indicate
these two exception pages and select the alternate paper size to use.
To add Exceptions select the Add Exceptions button above the table.
1. Enter the page number the exception programing applies to. If multiple exceptions are required it
is recommended you enter all the page numbers, separated by a comma or enter a page range
separated by a dash.
If individual programing is required for some of the exceptions, the entry can be edited from the
table.
2. Select the Paper requirements for the exceptions and select OK.
If Use Job Setting is displayed, the same paper as the main job is used.
3. Select the 2-Sided Printing requirements for the exceptions:
• Use Job Setting uses the same programing applied to the
main job.
• 1-Sided Print prints the exception pages on one side only.
• 2-Sided Print prints the exception pages on both sides of
the sheet of paper with the images printed so the job can
be bound along the long edge of the sheet.
• 2-Sided Print, Flip on Short Edge prints the exception
pages on both sides of the sheet of paper with the images
printed so the job can be bound along the short edge of
the sheet.
Job Settings displays the paper requirements specified for the
main job.
4. Select OK to save your selections and exit.
All the exceptions programed display in the table.
5. If any exceptions pages require individual programing, such as a different paper color or a
different number of inserts, select the entry and use the Edit button to change the programing.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
