Xerox Phaser 8860 System Administrator Guide

Protocol Control
System Administrator Guide
3-6
Protocol Control
This section includes:
■ HTTP on page 3-6
■ TCP/IP on page 3-7
■ Port 9100 on page 3-7
■ LPR on page 3-8
■ IPP (Internet Printing Protocol) on page 3-8
■ SNMP (Simple Network Management Protocol) on page 3-9
■ FTP (File Transfer Protocol) on page 3-9
■ Email Server or SMTP (Simple Mail Transfer Protocol) on page 3-10
■ MaiLinX Remote Printing on page 3-11
■ MaiLinX Alerts on page 3-12
See also:
Discovery Protocols on page 2-5
All network protocols, including network printing, printing services, printer discovery, and
management protocols can be enabled or disabled on the printer. If a protocol is enabled, you
can set configuration parameters.
Note: To secure protocols, disable any protocols you are not using. This prevents
unauthorized access through applications that use these protocols. For example, if you want to
use IPP for a secure printing channel, disable the other printing protocols, Port 9100 and LPR.
HTTP
By default, HTTP is enabled. For information on disabling HTTP, contact Xerox Technical
Support at www.xerox.com/support
.
See also:
About HTTP, HTTPS, and SSL/TLS on page 4-3

Xerox Phaser 8860 Specifications

General

Brand	Xerox
Model	Phaser 8860
Category	All in One Printer
Language	English