Paper and Media
Xerox
®
VersaLink
®
B7025/B7030/B7035 Multifunction Printer 159
User Guide
3. Move the width guides to the edges of the tray.
4. Flex the sheets back and forth and fan them, then align the edges of the stack on a level surface.
This procedure separates any sheets that are stuck together and reduces the possibility of jams.
Note: To avoid jams and misfeeds, do not remove paper from its packaging until you are ready to
use it.
5. Load the paper in the tray.
− For long-edge feed:
• For 1-sided printing, load letterhead or pre-printed paper face down with the top edge
toward the back. Load hole-punched paper with the holes to the right.
To Next Page
Loading...
Need help?
General
