Using Custom Paper Sizes
You can print on custom paper sizes that are within the minimum and maximum size range supported by the
printer. For details, refer to Supported Paper.
DEFINING CUSTOM PAPER SIZES
To print on custom paper sizes, define the custom width and length of the paper in the print driver software and on
the printer control panel. When setting the paper size, ensure that you specify the same size as the paper in the
tray. Setting the wrong size can cause a printer error. Print driver settings override control panel settings when you
print using the print driver software on your computer.
Creating and Saving Custom Paper Sizes in the Print Driver
Custom-size paper settings are saved in the print driver and are available for you to select in all your applications.
Use the custom-size paper settings to define a custom paper size for long media, such as banner paper.
For details on supported paper sizes for each tray, refer to Supported Paper.
For further details about creating and saving custom paper sizes in the print driver, click the HHeellpp ((??)) button in the
bottom-left corner of the printer settings window.
Creating and Saving Custom Sizes for the Windows V3 Print Driver
To create and save custom paper sizes for the Windows V3 print driver, perform the following:
1. In the print driver, click the PPrriinnttiinngg OOppttiioonnss tab.
2. For Paper, click the arrow, then select OOtthheerr SSiizzee >> AAddvvaanncceedd PPaappeerr SSiizzee >> OOuuttppuutt PPaappeerr SSiizzee >> NNeeww.
3. In the New Custom Paper Size window, enter the height and width of the new size.
4. To specify the units of measurement, at the bottom of the window, click MMeeaassuurreemmeennttss, then select IInncchheess or
MMiilllliimmeetteerrss.
5. To save, in the Name field, type a title for the new size, then click OOKK.
Creating and Saving Custom Sizes for the Windows V4 Print Driver
To create and save custom paper sizes for the Windows V4 print driver, perform the following:
1. From Windows Control Panel, select DDeevviicceess aanndd PPrriinntteerrss.
2. Select the printer, then click PPrriinntt sseerrvveerr pprrooppeerrttiieess.
3. On the Forms tab, for Create a new form, click the check box.
4. For Form name, type a name for the new paper size.
5. In the Form description (measurements) area, enter the settings:
• For Units, select MMeettrriicc or EEnngglliisshh.
• For Paper size, enter measurements for Width and Height.
• For Printer area margins, enter measurements for Left, Right, Top, and Bottom.
Note: Ensure that the measurements that you specify are within the supported ranges for the device.
Xerox
®
VersaLink
®
C71XX Series Color Multifunction Printer User Guide 155
Printing
To Next Page
Loading...
Need help?
General
Weight and Dimensions
