Xerox Versant 3100 User Manual

7. Install the dry ink /toner cartridge by aligning it straight out from the press and gently
sliding in until it stops.
8. Close the dry ink / toner cover.
If the cover does not close completely, make sure the cartridge is in the lock position
and is installed into the appropriate dry ink / toner location.
Note
After you replace a dry ink / toner cartridge, the system automatically resets the High
Frequency Service Item (HFSI) usage counter for this CRU to zero (0). Check the
consumables Supplies screen to verify the reset and new status.
Replacing the Dry Ink / Toner Waste
Bottle
The dry ink / toner waste bottle collects dry ink / toner that accumulates during the
printing process.
Note
When the waste bottle is full, a message displays on the press touch screen informing
you to exchange the full bottle with an empty one.
1. Ensure that the press is stopped (not running any jobs).
2. Open the center front door and locate the waste bottle.
4-5Xerox
®
Versant
®
3100 Press
Quick Start Guide
Maintenance

Xerox Versant 3100 Specifications

General

Brand	Xerox
Model	Versant 3100
Category	Power Tool
Language	English