Scanner Options, Maintenance and Troubleshooting Xerox
®
W130 / W110 Scanner
User Guide 6-11
1. Pull down the paper feed roller cover and pull it towards you to access the rollers.
2. Pull down on the plastic arms holding the roller in place.
3. Pull out the roller.
4. Discard the rollers, they cannot be repaired or reused.
5. Take the new rollers out of their packaging.
6. Align the end of the bar with the hole in the rollers and slide the rollers onto the bar. The
rollers will click when they are locked in place.
7. Lift the roller cover up and carefully push it closed to lock it in place. Make sure everything is
aligned properly and the cover is fully closed. If the cover is not fully closed it will break during
scanning and damage the scanner.
To Next Page
Loading...
Need help?
General