⑧ ISP/ECU/DOIP interface
⑨ A utomation programming
interface (reserved)
⑩ RJ45 network port
(for connection to PC software)
USB A interface
(for connection to PC software)
USB B interface
(WIFI Network Card, U disk and
other devices)
⑫⑪⑩⑨⑧⑦⑥
⑤
④
③
②
①
4 Product Functions Overview
4.1 Device Functions
4.1.1 Device Connection and How to Use
Product Functions Overview
03
04
Product Functions Overview
USB/RJ45
4.1.2 Main Functions
4.2 Device Interfaces and Accessories
4.2.1 Device Interface Description
① I C Locking Holder
② Status Indicator
③ Main unit switch
④ Touch screen
⑤ Magnetic shield
⑥ Power socket
⑦ PE grounding plug
11
12
Used for locking the chip holder to read
chips.
Power indication and main unit working
status indication.
Magnetic design, can be quickly removed
to replace other types of adapter board.
(Grounding is required for specific environmental
scenarios, and can be left vacant for non-specific
environments.）
Integrated chip program, ECU computer
programinterface, while supporting the DOIP
protocol interface.
Multi-PROG is especially designed for the automotive repair and automotive
module programming by Shenzhen Xhorse Electronics Co., Ltd. The device
supports the programming, reading, writing and cloning of common
automotive MCUs, automotive memory chips, common electronic modules and
automotive ECU computer boards.
Multi-PROG programmer consists of 2 parts: the main unit and the PC software.
The main unit can be connected to the PC software through the wired network port RJ45
(interface 10) or USB port (interface 11).
Memory read/write: support the reading/writing of common memory chips (see
Chapter 5 for details).
MCU read/write: support for various brands of automotive MCU read/write (see
Chapter 6 for details).
Automotive immo module read and write: support for common automotive immo
module data read and write (see Chapter 7).
Engine ECU read/write: support a variety of automotive engine ECU computer data
read/write operations (see Chapter 8), support for part of the ECU computer
checksum data processing.
Gearbox TCU read/write: support many types of automobile gearbox TCU computer
data read/write (see Chapter 9 for details).
Third-party script function: supports loading software scripts developed by the third
party, and utilizes the script function to provide data processing and data
modification.
The batch write function: Multi-PROG devices support the factory mode for batch
write to chips. In this mode, it is possible to write chips in batch, offline write, file
offline write, and other functions.
To Next Page
Loading...
Need help?
General
