Setting
The correct location of the docking station:
More than 0.5 m of free space on the left;
More than 0.5 m of free space on the right;
More free space 1.5 m ahead.
Turn on the device and charge
Press and hold the Power button to turn on the
device. Wait until the ring indicator turns on, after
which you can connect the device
to the docking station for recharging.
The color of the annular indicator indicates the
level of charge
- White color: level of charge> 20%;
- Red color: charge level <20%;
Caution: If the charge level is too low, the device
may not turn on. Please, timely charge the
vacuum cleaner.
Power button
Quick settings
This device supports the Mi Smart Home platform, so you can use a smartphone to
remotely control the vacuum cleaner by connecting to the Smart Home application. Also,
the device supports the MIUI system, so it can synchronize and interact with other smart
home devices.
1. Downloading the application
In Mi Store, nd the mobile application «Smart Home», or
scan the image of the QR-code below.
2. Adding new devices
Open the «My devices» window in the application, and in the
upper right corner click the «+» button to add the necessary
device. Then nd the new device in the «My devices» list.
3 Buy more
To purchase even more smart devices, download the mobile application «MiJia devices».
Setting
Wi-Fi indicator
- Slowly ashing: waiting for connection;
- Fast ashing: during connection;
- The indicator is always on: Wi-Fi is already
connected;
Attention: if the smartphone does not connect
to the vacuum cleaner, see «Instructions for
use» - «Resetting Wi-Fi settings».
Installing the attachments for wet cleaning
2. Filling the water tank: open the lid of the
water tank, ll it with water and close the lid.
Caution: the least amount of oor cleanser or
disinfectant may damage the lter.
3. Installing the wet cleaning module: Slide
the module along the back of the main unit
until the special marks are aligned and you
hear a distinctive sound indicating successful
installation of the module.
Attention: for the best result of wet cleaning
it is recommended to clean the cleaning
attachment three times before using it again.
1. Install the wet cleaning attachment: moisten the squeegee, squeeze it as much as
possible and insert it into the special chute, pass along the water tank to the end and
securely x the other edges of the nozzle with the help of suitable adhesive tapes.
Attention:
Do not turn on the wet cleaning function when there is no one at home.
If the room is carpeted, include the function of removing from the walls.
To Next Page
Need help?
General
