Xilinx Alveo U50 Installation Guide

Updang the SC rmware will take up to 2 minutes. A successful SC rmware update will
result in a message similar to the one shown below. The SC rmware will be updated and no
cold boot is required.
Updating SC firmware on card[0000:65:00.0]
Stopping user function...
INFO: found 4 sections
.............................
INFO: Loading new firmware on SC
................
Successfully flashed Card[0000:65:00.0]
1 Card(s) flashed successfully.
The installaon for deployment is now complete. You can refer to Chapter 5: Card Bring-Up and
Validaon for informaon on how to validate the installaon.
Related Information
Generang the xbmgmt ash --update Command
Troubleshoong
Changing XRT and Target Plaorm Versions
Chapter 4: Installing the Deployment Software
UG1370 (v1.7) December 9, 2020 www.xilinx.com
Alveo U50 Data Center Accelerator Card Installation Guide 24
Send Feedback

Xilinx Alveo U50 Specifications

General

Brand	Xilinx
Model	Alveo U50
Category	Computer Hardware
Language	English