Xilinx Alveo U50 Installation Guide

Appendix C
Creating a Vault Repository for
CentOS
On CentOS, yum install kernel-headers always installs the latest version of the headers,
but might not match your kernel version. This causes the installaon of XRT to skip compilaon
of the driver modules and will silently fail. To correctly install XRT, you must create a vault
repository le that points to versions matching the kernel.
The following is an example repository for CentOS 7.4 created in the following le:
/etc/yum.repos.d/centos74.repo
# CentOS-Base-7.4.repo
#
# This repo is locked to 7.4.1708 version
#
# C7.4.1708
[C7.4.1708-base]
name=CentOS-7.4.1708 - Base
baseurl=http://vault.centos.org/7.4.1708/os/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[C7.4.1708-updates]
name=CentOS-7.4.1708 - Updates
baseurl=http://vault.centos.org/7.4.1708/updates/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[C7.4.1708-extras]
name=CentOS-7.4.1708 - Extras
baseurl=http://vault.centos.org/7.4.1708/extras/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[C7.4.1708-centosplus]
name=CentOS-7.4.1708 - CentOSPlus
baseurl=http://vault.centos.org/7.4.1708/centosplus/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
enabled=1
[C7.4.1708-fasttrack]
Appendix C: Creating a Vault Repository for CentOS
UG1370 (v1.7) December 9, 2020 www.xilinx.com
Alveo U50 Data Center Accelerator Card Installation Guide 39
Send Feedback

Xilinx Alveo U50 Specifications

General

Brand	Xilinx
Model	Alveo U50
Category	Computer Hardware
Language	English