Technical Support US: 888-443-2751 Technical Support INTL: 316-943-2751
48
Do not use caustic cleaners on the conveyor bearings (refer to Pg. 43)
Do not use abrasive cleaners or abrasive pads (refer to Pg. 43)
*Do not use caustic cleaners on the control panel. Only use cleaners compatible with Lexan®
on the face of the conveyor control (refer to Pg. 43)
Do not use high pressure water to clean the oven.
Contact a factory representative or a local service company to perform all other mainte-
nance and repairs.
As with any appliance, periodic maintenance is required. Many factors affect this schedule
such as product mix and hours of usage. An example schedule is included.
OVEN MAINTENANCE
Oven must be cool and the electric cord unplugged before any cleaning or mainte-
nance is performed.
DANGER
Wipe down Front, Sides, & Top □
Wipe down Control Box & Control Panel * □
Clean or Replace Fan Filters □
Remove large debris from Conveyor □
Remove debris from Finger Outers □
Remove debris from inside Bake Chamber □
Remove debris from Main Fan Motor □
Clean inside Bake Chamber □
Clean Conveyor Assembly □
Check Fan Filters for dirt □
Check Conveyor Wire Belt for Stretch □
Check Conveyor Drive Roller Chain for Stretch □
Lubrication of Window Pins W/ Food Grade Grease
□
Conveyor Drive Roller Chain □
Oven Maintenance Schedule
To Next Page
Loading...
Need help?
General