Operating elements
Functions
1
? /MOD
[Device on/o] Press the power button to
turn the unit on. Keep it pressed for ca. 2
seconds to turn it down.
[MODE]
If the unit is on, press this button
to switch between diverse modes: Radio,
AUX, Bluetooth, USB, SD.
2
BAND/AMS
[BAND] in radio mode: to switch
between
frequency bands: FM1, FM2, FM3, AM1 and
AM2
[AMS]
long press
Starts the automatic
frequency scan and stores the found radio
stations (in Radio mode).
3
VOL+ boosts the loudness.
4
VOL- reduces the loudness.
5
1/PAU Pause/stored radio stations
[Playback] Starts / pauses the playback.
[Radio] Stored station "1"
6
2/SEL
long press
1. Audio settings
Following settings are available: AUTO (LED
backlights), Bass, Treble, Balance, Fader,
Loudness, Equalizer and Volume
2. Then followed by radio settings
Following settings are available: AF, TA, PTY,
TA Seek, PI, Retur and BEEP
[Radio] Stored station "2"
7
3/RPT Repeat/stored radio stations
[Playback] repeat
[Radio] Stored station "3"
8 MUTE/CLK
[MUTE] Mute On/O.
[CLOCK]
long press
Clock settings
9 Next track
[Play] skip to the next track.
1
2
3
4
5
6
7
8
9
10
11
13
15
14
16
18
12
17