28
BAG
08
902308
SH M3x8
903306
SFH M3x6
306219
SHIM 3x6x1
306219
SHIM 3x6x2
306219
SHIM 3x6x3
For improved weight balance, we recommend
using a narrow, light servo.
306310
FROM SERVO
306219
NOT INCLUDED
NOT INCLUDED
NOT INCLUDED
NOT INCLUDED
306301
902308
306200-K
NOT
INCLUDED
903308
903306
903306
903306
903308
903306
306131 for 6-cell or 5-cell
battery configuration
306182 for LiPo
battery configuration
960140
NO
T INCLUDED
309402
902306
8. FINAL ASSEMBLY
305912~88 NARROW PINION GEAR ALU HARD COATED (OPTION)
30 6131 SET OF COMPOSITE BATTERY BACKSTOPS - V2
30 6163-K GRAPHITE BATTERY STRAP 6-CELL (SET) - BLACK - (OPTION)
30 6182 COMPOSITE LIPO BATTERY BACKSTOP (1+1)
30 6200-K ALU SERVO MOUNT - BLACK (2)
30 6219 COMPOSITE SET OF SERVO SHIMS (4)
30 6301 ANTENNA MOUNT - THIN
30 9402 BODY CLIP FOR 6MM BODY POST (4)
90 2306 HEX SCREW SH M3x6 (10)
90 2308 HEX SCREW SH M3x8 (10)
90 3306 HEX SCREW SFH M3x6 (10)
90 3308 HEX SCREW SFH M3x8 (10)
96 0140 NUT M4 WITH FLANGE (10)
30 6310 ANTENNA (2)
DETAIL
FROM
SERVO
SERVO NOT INCLUDED
90°
Attach servo arm to servo output shaft
using screw from servo. Servo arm must be
perpendicular to chassis when servo is in
neutral.
Install servo using 4 identical shims
of same thickness between the
servo tabs and the mounting posts
so the servo arm does not touch
the top deck. There are 3 different
thicknesses of shims.
1mm 3mm2mm
When adjusting steering on the radio, it is recommended to use full steering adjustment in
order to get the best steering from the car. It is important to verify that the steering block
does not touch the C-hub; that would lead to chassis tweak due to extra servo strain.
IMPORTANT!
To Next Page
Loading...
Need help?
General
