Xtool D8 User Manual

24
vehicle, and the main test line should be connected to the OBDII-
16 adapter and the tablet
The connection method is shown in the figure below:
Fig 4-1
1
Tablet
2
Main Test Cable
3 OBDII-16 Connector
4
Vehicle
*Caution: Please make sure all the cables are connected tightly;
The vehicle’s DLC is not always located under the dash; for the
location of the DLC, please refer to the vehicle’s user manual.
DIAGNOSIS
After the tablet device is properly connected to the vehicle, you
could start the vehicle diagnosis.

Xtool D8 Specifications

General

Item	Description
Processor	Quad-core processor 1.8GHz
RAM	2G
Sensor	Gravity sensor
ROM	64G
Display	8-inch capacitive, 1024×768 resolution
Connectivity	USB Wi-Fi
Camera	8-megapixel autofocus rear camera with flash
Audio input/ Audio output	Microphone/ Loudspeaker
Ports	 USB3.0  DC charging port  VGA port
Battery	10000mAh 3.7V lithium polymer battery
Input voltage	12V DC
Operating temperature	-10~50℃
Relative humidity	< 90%

Weight and Dimensions

Dimensions	274.0×175.0×33.8 mm