Write injector actual code or rewrite code in the ECU to the injector
code of the corresponding cylinder so as to more accurately
control or correct cylinder injection quantity.
After the ECU or injector is replaced, injector code of each cylinder
must be confirmed or re-coded so that the cylinder can better
identify injectors to accurately control fuel injection.
*Note
a) After cleaning, generally there is no need to do the coding matching function.
b) The identification of the fuel injector includes its working accuracy value and type
value. When replacing it, you need to find the corresponding model for replacement.
c) At present, mainstream cars support injector coding function
ABS BLEEDING
Anti-lock Braking System (ABS) Bleeding allows you to perform
various bi-directional tests to check the operating conditions of
ABS.
1. When the ABS contains air, the ABS bleeding function must be
performed to bleed the brake system to restore ABS brake
sensitivity.
2. If the ABS tablet, ABS pump, brake master cylinder, brake
cylinder, brake line, or brake fluid is replaced, the ABS bleeding
function must be performed to bleed the ABS.
3. After the oil in the brake oil tank is seriously insufficient or the
brake fluid is replaced, ABS Bleeding is also required
*Note
To Next Page
Loading...
Need help?
General
Weight and Dimensions
