EasyManuals Logo
Home>Xtool>Diagnostic Equipment>D8

Xtool D8 User Manual

Xtool D8
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #56 background imageLoading...
Page #56 background image
51
this function to support the activation of the hidden functions of the
car (except those that are not supported by the hardware).
Different hidden functions may require different operation steps,
please be sure to operate under the guidance.
Cautions!
The functions that the original ECU must support can be
flashed out.
Brushing to hide will not destroy the ECU system layer, but
only open and close some functions.
Most of them can be re-flashed multiple times.
Support cars:
Volkswagen, Toyota, BMW, Ford, Mazda
ODO RESET
This function allows you to copy, write or rewrite the kilometers in
the odometer chip by using the car diagnostic tablet and data
cable, so that the odometer can display the actual mileage.
*Some models need to be used with EEPROM adapter for ODO
reset. The EEPROM adapter is not included in this product.
Please purchase it separately if you need to use i

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xtool D8 and is the answer not in the manual?

Xtool D8 Specifications

General IconGeneral
ItemDescription
ProcessorQuad-core processor 1.8GHz
RAM2G
SensorGravity sensor
ROM64G
Display8-inch capacitive, 1024×768 resolution
ConnectivityUSB Wi-Fi
Camera8-megapixel autofocus rear camera with flash
Audio input/ Audio outputMicrophone/ Loudspeaker
Ports USB3.0  DC charging port  VGA port
Battery10000mAh 3.7V lithium polymer battery
Input voltage12V DC
Operating temperature-10~50℃
Relative humidity< 90%
Weight and Dimensions IconWeight and Dimensions
Dimensions274.0×175.0×33.8 mm

Related product manuals