Yaesu FT-7100M User Manual

32 FT-7100M Operating Manual
RECALLING MEMORIES
From the VFO mode, momentarily press the
[
V/M
]
key to activate the “Memory” mode.
When more than one memory has been stored, use the Main Dial knob to select a memory
for operation. Alternatively, the microphone’s
[
UP
]
/
[
DWN
]
buttons may be used to select or
scan through the available memories. When using the microphone’s
[
UP
]
/
[
DWN
]
buttons,
press the button momentarily to move one step up or down; press and hold the
[
UP
]
or
[
DWN
]
button for 1/2 second to begin memory scanning.
When you recall a memory which contains independently-
stored transmit and receive frequencies, the “ ” indica-
tion will appear in the display.
If you recall a memory which includes an alpha/numeric name,
press and hold in the
[
LOW
]
key for 1/2 second to display
the alpha/numeric tag. Repeatedly pressing and holding in
the
[
LOW
]
key will toggle operation between the “Fre-
quency” display and “Tag” display options.
To return to the VFO mode, just press the
[
V/M
]
key again.
Direct Keypad Memory Recall (Requires MH-48A6J)
The desired memory channel may be recalled directly from the microphone’s keypad.
To recall a memory channel from the keypad, just press the digits on the keypad in the proper
sequence, followed by the
[
Ú
]
key.
Example:
To recall memory channel #5, press
[
5
]
à
[
Ú
]
.
To recall memory channel #100, press
[
1
]
à
[
0
]
à
[
0
]
à
[
Ú
]
.
MEMORY OPERATION
“Tag” Display
“Odd Split” memory

Yaesu FT-7100M Specifications

General

Brand	Yaesu
Model	FT-7100M
Category	Transceiver
Language	English