48 FT-7100M Operating Manual
The FT-7100M’s Menu System allows a number of transceiver operating parameters to be
custom-configured for your operating requirements.
The Menu is easy to active and set, using the following basic procedure:
1. Press and hold in the
[
BAND
]
key for 1/2 second to activate the “Menu” mode.
2. Rotate the Main Dial knob to select the Menu item to be adjusted.
3. Press the
[
BAND
]
key momentarily to enable changing of the selected Menu item.
4. Rotate the Main Dial knob to adjust or select the desired parameter of the selected
Menu item.
5. After completing your adjustment(s), press and hold in the
[
BAND
]
key for 1/2 second to
save the new setting(s) and exit to normal operation.
MENU SYSTEM
To Next Page
Loading...
Need help?
General
