Yaesu FT-817ND User Manual

27FT-817ND Operating Manual
AUTOMATIC POWER-OFF FEATURE
The APO feature helps conserve battery life by automatically turning the transceiver off
after a user-defined period of time within which there has been no dial or key activity. The
available selections for the time before power-off are 1 ~ 6 hours, as well as “APO Off.” The
default condition for the APO is OFF, and here is the procedure for activating it:
1. Press and hold the key for one second to enter the Menu mode.
2. Rotate the knob to recall Menu #08 (APO TIME).
3. Rotate the knob to select the desired time period after which the radio will auto-
matically shut down.
4. Press and hold the key for one second to save the new setting and exit to normal
operation.
Once you have programmed a time interval, the APO countdown timer will start whenever
some front panel action (tuning, transmission, etc.) is completed.
When the APO is activated, the “ ” icon will appear at the center bottom on the LCD. If
there is no action by you within the time interval programmed, the microprocessor will shut
down the radio automatically.
Just press and hold in the switch for one second to turn the transceiver back on after an
APO shutdown, as usual.
RECEIVER ACCESSORIES

Yaesu FT-817ND Specifications

General

Output power	1 W
Frequency range	30 - 100000 MHz
Channels quantity	208 channels
Display type	LCD
Product type	Portable CB radio
Product color	Black
Housing material	-
Battery type	AA
Number of batteries supported	8

Weight and Dimensions

Depth	165 mm
Width	135 mm
Height	38 mm