Yaesu FT-817ND User Manual

7FT-817ND Operating Manual
INSTALLATION
CONNECTING THE MICROPHONE

To connect the microphone, plug its connector (latch side UP) into the MIC jack on the
right side of the transceiver. Press it
gently inward until you hear the
“click” of the latch.

To disconnect the microphone, press
gently on the “PUSH ” label on
top of the microphone connector’s rubber boot.
While pressing on this spot, gently pull the con-
nector outward from the body of the transceiver.
Note: During “Digital” or “Packet” operation, it is not necessary to disconnect the micro-
phone, as activation of the PTT line from the DATA connector automatically cuts off the
audio input from the MIC jack.
SHOULDER STRAP INSTALLATION
The convenient Shoulder Strap is designed for maximum comfort and security for your FT-
817ND transceiver.

Refer to the illustration, and connect the
shoulder strap to the attachment tabs just
behind the front panel of the FT-817ND.
Be sure to have the shoulder strap aligned
correctly, without twists in the straps.

A convenient microphone hanger is located
on one end of the padded top section of
the Shoulder Strap. When not in use, the
microphone may be affixed here, freeing
both of your hands for other tasks.
RUBBER FOOT INSTALLATION
Four Rubber Feet are provided with your FT-
817ND, for ease of use when operating from a
base station or camp table.
Refer to the illustration, and affix the Rubber
Feet in the appropriate locations.





Yaesu FT-817ND Specifications

General

Output power	1 W
Frequency range	30 - 100000 MHz
Channels quantity	208 channels
Display type	LCD
Product type	Portable CB radio
Product color	Black
Housing material	-
Battery type	AA
Number of batteries supported	8

Weight and Dimensions

Depth	165 mm
Width	135 mm
Height	38 mm