13
Authenticate (activate) the WIRES-X server
If the WIRES-X server authentication (activation) has not been completed on the personal computer to be used, the
“WIRES ID Activation” screen opens automatically.
1. Enter the Node ID and Room ID (both are 5-digit numbers).
The Node ID and the Room ID are described in the e-mail received when the user registration is completed.
“RADIO ID“ of the transceiver connected to the PC is automatically displayed in the serial number column. If “RADIO
ID“ is not displayed, check the connection between the transceiver and the computer again.
2. Click the [ID Entry].
When activation is completed, information on registration is automatically displayed for “User ID”, “Call Sign”, “City”,
“State”, and “Country”.
3. Click the [OK].
The information of the User ID is saved on the computer and “Settings” window will appear.
On this screen the settings such as “Comment” of your station may be added to display in the ID list.
4. Click the [OK].
The “Settings” window closes and the “Main Screen” will appear.
When using it in “Direct Operation”, “Transceiver settings (Access Point only)” (page 14) is not necessary, so the
initial setting is completed.
Proceed to
“Basic Operation” (page 16).
To Next Page
Loading...
Need help?
General